BEST LUX MAT BOYA - BEST LUX Matte Paint
 

Description:

Best Lux Matte Paint — Alkyd semi-matt paint is suitable for the protection and decoration of most interior surfaces (wood, metal and masonry, plaster, etc.) that require a strong, finish coat. Resistant to up to 90°С heating. Suitable for painting heating radiators, but for long term use on hot surfaces may cause slight discoloration. It can also be used on iron and zinc surfaces, such as tin downpipes, chutes and window ledges. However, in such cases it is necessary to treat the surface with BEST 

Antipas special primer. Is thixotropic, lies well on the surface and does not drain. Has extremely high protective properties and is resistant to weathering. Resistant to interior air humidity and withstands frequent washing. Creates long-lasting coating and has a decorative look. 

Application:

The entire surface must be sound, clean, dry and free from substances of previous paintings before applying BEST Lux Matt Paint.  To get perfect coating on new unpainted areas apply prime coat beforehand. Paper previously painted surfaces.  Sand wooden surfaces and clean metallic surfaces of corrosion and prime with BEST ANTIPAS Primer beforehand. Before applying stir paint thoroughly and if necessary dilute with Best Sintetik Tiner thinner. Apply on ready surface with a roller, brush, airless or compressed air paint spray in 1-2 coats at temperature between 5°С to 30 °С.

Application areas:
Interior/Exterior use

Appearance:
Film color: white

Containers:
0.75 l; 2.5 l; 15l. 

Remove paint before washing the tools. Immediately cleanse Best Sintetik Tiner tools. Do not flush the remains down the water carriage. 

Transportation and storage:

During transportation be cautious to prevent splashing. Keep away from heating and open flame!

Additional Information: 

Does not contain lead.

Caution:

It is flammable. Keep away from places of inflammation. No smoking.  Work in a well-ventilated area. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and see a doctor. In case of contact with skin, wash immediately with plenty of soap and water or means of skin care - DO NOT USE SOLVENTS! When working indoors with large surface areas, wear a breathing mask! In case of contact with mouth, seek medical attention and show the pot or label. Keep away from children.  

Drying time: 

Drying time between layers at (20+2) °С temperature, not more than 24 hours.

Final drying at (20+2) °С temperature, not more than 24 hours.

Guaranteed shelf life: 

12 months from the date of manufacture as printed on the container.